SENTRY flagpoles provide additional security
and increased aesthetics by locating the halyard and cam cleat
inside the flagpole shaft. The cam cleat locking mechanism used
to raise and lower the flag is accessible only through a keyed
access door. Halyard noise is eliminated since only through a
keyed access door. Halyard noise is eliminated since only the
flag arrangement, counterweight, retianer ring and snaphooks are
exposed.
Standard fittings on the SENTRY flagpole include a gold anodized, spun aluminum ball; cast aluminum, stationary truck assembly with a cast nylon sheave; braided polypropylene halyard; nickel plated snaphooks; beaded retainer rings and neoprene coated counterweight. The cam action cleat is contained in a reinforced, cast aluminum housing secured with 20 stainless steel, allen head screws. Also included is a heavy gauge, spun aluminum flash collar, foundation sleeve assembly and installation instructions.
SENTRY flagpoles are polished to a Deep Luster Finish. Refer to Accessories for optional accessories, finishes and caution information regarding installation and flag sizes.
| INSTALLATION INSTRUCTIONS | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| HEIGHT | DIAMETER | WALL | LENGTH | SHIP | UNFLAGGED WIND SPEED | FLAGGED WIND SPEED | ||||||
| EXP | LOA | BUTT | TOP | THICK | TAPRD | STGHT | SEC | CONSTANT | W/GUST FACTOR | FLAG SIZE | CONSTANT | W/GUST FACTOR |
| 20' | 23'0" | 5.0" | 3.0" | .125" | 11'8" | 11'4" | 1 | 193 | 250 | 4'x6' | 100 | 130 |
| 25' | 28'0" | 5.0" | 3.0" | .125" | 11'0" | 17'0" | 1 | 111 | 144 | 4'x6' | 80 | 104 |
| 25' | 28'0" | 5.0" | 3.0" | .156" | 11'0" | 17'0" | 1 | 148 | 192 | 4'x6' | 90 | 117 |
| 30' | 33'0" | 5.0" | 3.0" | .156" | 17'3" | 15'9" | 1 or 2 | 92 | 119 | 5'x8' | 70 | 91 |
| 30' | 33'0" | 6.0" | 3.5" | .156" | 17'3" | 15'9" | 1 or 2 | 147 | 191 | 5'x8' | 90 | 117 |
| 30' | 33'0" | 6.0" | 3.5" | .188" | 17'3" | 15'9" | 1 or 2 | 170 | 221 | 5'x8' | 100 | 130 |
| 35' | 38'6" | 5.0" | 3.0" | .156" | 20'0" | 18'6" | 1 or 2 | 74 | 96 | 5'x8' | 60 | 98 |
| 35' | 38'6" | 6.0" | 3.5" | .156" | 20'0" | 18'6" | 1 or 2 | 94 | 122 | 5'x8' | 70 | 91 |
Duranodic
Flagpole Finishes |
|||
 |
 |
 |
 |
Light Bronze 311 |
Medium Bronze 312 |
Dark Bronze 313 |
Black 335 |
All images are copyright by Concord Industries and may not be used or reproduced without their expressed permission
Ground
Sleeve Installation a.k.a. Ground Mount, Foundation Mount or Groundset |
|
 |
Ground
mounted installations
Ground Mount The embedded, or Groundset, mount is the method of choice for mounting aluminum flagpoles at grade. Flagpole shafts so mounted have a higher wind speed rating than the same shafts base-plate mounted. Specifications: 1. Provide spun aluminum collar, Type FC-11, finished to match flagpole shaft. Diameter shall be at least 1'' greater than diameter of sleeve. |
| Ground Sleeve Specifications | |||||
| Shaft Foundation Dimensions | |||||
HEIGHT
|
BUTT
DIAMETER |
SLEEVE
DIAMETER |
DEPTH
A |
DEPTH
B |
DEPTH
C |
20' |
4" |
6"
|
3'
6" |
30" |
24" |
20' |
5" |
8"
|
3'
6" |
30" |
24" |
25' |
5" |
8"
|
3'
6" |
30" |
24" |
25' |
5.5"
- 6" |
10"
|
3'
6" |
30" |
24" |
30' |
5" |
8"
|
3'
6" |
30" |
24" |
30' |
6" |
10" |
3'
6" |
30" |
24"
|
35' |
5" |
8" |
4'
0" |
36"
|
30" |
35' |
6"
- 7" |
10" |
4'
0" |
36"
|
30" |
40' |
7" |
10" |
4'
6" |
42"
|
36"
|
40' |
8" |
12" |
4'
6" |
42"
|
36"
|
45' |
8" |
12" |
5'
0" |
48" |
42" |
50' |
8" |
12" |
5'
6" |
48" |
42" |
50' |
10" |
15" |
5'
6" |
48" |
42" |
60' |
10"
- 12" |
15" |
6'
10" |
48" |
42" |
70' |
10"
- 12" |
15" |
8'
0" |
60"
|
48" |
80' |
12" |
15" |
9'
0" |
60" |
48" |
If
you have any questions or comments, we want to hear from you. Telephone us at (901) 452-0026, toll free (800) 289-0036 or e-mail us at info@amflag.com |
©Copyright
All rights reserved by American Flag & Flagpole Company 2005 Graphic Design and Website Development by Graphic Legends |